Paving · Highway · Site Surfacing

Asphalt mats, base course, and striping on the same ticket.

Century Construction Inc. places hot-mix asphalt, builds highway lanes, paves parking lots, installs aggregate base course, stripes finished pavement, and surfaces roadways from St Paul, Minnesota. The paver lays the mat; the steel-drum roller locks the density before the next lift or the next line of paint.

Asphalt pavingPaver screed and hot-mix mat
Highway constructionTravel lanes and shoulders
Parking lot pavingCommercial stall fields
Base, striping, surfacingAggregate, paint, overlay
Asphalt paver placing a hot-mix mat with a steel-drum roller compacting the fresh pavement on a roadway
Highway construction paving with an asphalt paver placing a new travel-lane mat and a roller compacting the adjacent lane
How the package is read

Highway lanes first. Then the lot, the base, and the paint.

A paving ticket starts on the road: the paver places a uniform asphalt mat on the travel lane, the roller follows on the fresh lift, and the next lane is held until density is in the book. Highway construction uses the same train — paver, haul truck, and roller — on divided alignments.

Century Construction Inc. then takes that train to parking lots, base course installation, striping, and roadway surfacing so one contractor holds the granular layer, the asphalt, and the painted lines together.

Paver and roller on the lane

Hot-mix is placed by the screed and compacted by the steel drum before traffic is released.

One paving ticket

Highway, parking lot, base course, striping, and surfacing stay on one schedule.

St Paul, Minnesota

Work is run from 96 Orange Ave W for buyers who need a local paving contractor.

Inspectable lifts

Base course, asphalt mat, and striping are listed as hold points before the next cover.

Work packages

Six packages that make up a paving job

The company focuses on asphalt paving, highway construction, parking lot paving, base course installation, striping, and roadway surfacing. The packages below are the work Century Construction Inc. prices and schedules.

01

Asphalt paving and roadway surfacing

Hot-mix asphalt placed by the paver screed on a prepared road, then compacted by the steel-drum roller. Roadway surfacing uses the same train for an overlay: a thin surface course on the existing alignment, steam on the mat, roller on the lift.

Asphalt paver screed placing a fresh hot-mix asphalt mat on a prepared roadway

Asphalt paving

The screed lays a uniform hot-mix mat. Steam rises from the black asphalt while the paver holds grade on the prepared road.

  • Paver screed on the roadway
  • Hot-mix asphalt mat in place
  • Prepared grade under the lift
Roadway surfacing overlay with a paver placing a surface course and a steel-drum roller compacting the mat

Roadway surfacing

A surface-course overlay is placed on the existing road. The roller follows the paver to lock the new lift.

  • Thin asphalt surface course
  • Paver on the existing alignment
  • Steel-drum roller on the overlay
02

Highway construction and parking lot paving

Highway work is the paving train on a multi-lane alignment: paver, haul truck, and roller on travel lanes and shoulders. Parking lot paving uses the same asphalt placement across a stall field, with the paver and roller working the lot before striping.

Highway construction paving train with an asphalt paver and a haul truck on a multi-lane roadway

Highway construction

The paver takes mix from the haul truck and places the travel-lane mat on the highway alignment.

  • Multi-lane highway alignment
  • Paver at the work front
  • Haul truck feeding the paver
Commercial parking lot asphalt paving with a paver, roller, and haul truck on a fresh black mat

Parking lot paving

Hot-mix is placed across the commercial lot. The paver, roller, and haul truck stay on the stall field until the mat is closed.

  • Asphalt mat on the parking lot
  • Paver and roller on the stalls
  • Haul truck at the lot edge
03

Base course installation and striping

Aggregate base course is graded and compacted before asphalt. After the mat is finished, a striping machine applies yellow and white lane lines and stall marks on the black pavement.

Base course installation with a grader spreading crushed aggregate and a dump truck delivering granular material

Base course installation

The grader spreads crushed aggregate on the subgrade. The dump truck delivers the granular lift for the base course.

  • Crushed aggregate base course
  • Grader spreading the granular layer
  • Dump truck delivering aggregate
Pavement striping machine applying yellow and white lane lines on fresh black asphalt

Striping

The striping machine lays yellow and white thermoplastic lines on the finished asphalt for lanes and stalls.

  • Striping machine on the pavement
  • Yellow and white painted lines
  • Fresh asphalt under the paint
Method

A paving sequence that does not skip the base, the mat, or the paint.

Work moves in one order: aggregate base course, asphalt paving or roadway surfacing, steel-drum compaction of the lift, then striping on the finished mat. Highway lanes and parking lots use the same hold points before the next cover.

1
Install and grade the crushed aggregate base course.
2
Place hot-mix asphalt with the paver on the highway, road, or parking lot.
3
Compact the lift with the steel-drum roller on the fresh mat.
4
Apply roadway surfacing where an overlay is specified.
5
Stripe yellow and white lines on the finished pavement.
Steel-drum roller compacting a fresh hot-mix asphalt surface course
Delivery

Finished lanes and lots, not open-ended field notes

The work we turn over is the same work shown here: a surfaced highway with lane lines, a striped parking lot, and an asphalt mat that has already taken the roller.

Finished highway travel lanes after roadway surfacing with white dashed lane lines and a yellow edge line

Highway closeout

Travel lanes are surfaced. White dashed lines and the yellow edge line are on the finished asphalt.

Finished parking lot after asphalt paving and striping with white stall lines

Parking lot closeout

The lot is paved. White stall lines are striped on the black asphalt.

Compacted asphalt surface course after the steel-drum roller has finished the lift

Compacted surface course

The steel-drum roller has closed the lift. The mat is ready for striping or traffic release.

Who issues the work

Buyers of a paving, highway, and striping package

Municipal streets

Asphalt paving and roadway surfacing on local alignments

Highway agencies

Travel-lane construction with paver, haul truck, and roller

Property managers

Parking lot paving and stall striping on one ticket

Retail owners

Lot resurfacing before yellow and white lines go down

Industrial parks

Base course and asphalt on drive lanes and yards

School campuses

Lot paving and striping held to the listed sequence

General contractors

One paving sub for highway, lot, base, and paint

St Paul area jobs

Work run from Orange Avenue for paving in the area